Power Line Networking Products
Designed & Manufactured in the USA
Crafted from the ground up for secure, reliable long-range communications over power lines backed by thousands of hours of accelerated testing under real world conditions
Core Networking
PLAN-DC2 : Power Line Network Gateway
This acts as the bridge between the power line network and front end. The front end could be a local or remote SCADA, database or remote https/MQQT push messaging. Each gateway can support up to 2500 network end nodes and can be connected to three phases of the secondary of a medium voltage (480Y 3phase) transformer providing power line network coverage to all nodes powered by those three phases.
PLAN-NC2 : Power Line Network Node
This is the core networking module. It is designed to be used as a part of the customer’s application board. It is also used in all of our interface and application boards to provide power line networking to sensors, controls, actuators and lighting loads.
OEM Interface Boards
PLAN-IB1 : 16 channel analog interface
Sixteen 0-10V analog channels to Power Line networking. Includes quick connect clamp type connectors, on board 80-305VAC AC-DC supply for powering external sensors (24V, 12V options) and fully protected analog input channels
PLAN-IB2 : 8 channel analog interface
Eight 0-10V analog channels to Power Line networking. Includes quick connect clamp type connectors, on board 80-305VAC AC-DC supply for powering external sensors (24V, 12V options) and fully protected analog input channels
PLAN-IB3 : RS232 communication interface
RS232 to Power Line network interface board
PLAN-IB4 : MODBUS communication interface
RS232 to Power Line network interface board
PLAN-IB5 : DALI communication interface
DALI-2 to Power Line network interface board
PLAN-IB6 : 3.3KVA load controller & energy monitor
Power line networked interface board for controlling loads up to 15A/220VAC using an on-board relay.
Full metering grade power monitoring using on board current sense for single phase loads
PLAN-IB7 : Heavy duty load controller & energy monitor
Power line networked interface board with a contractor control (line voltage) and external split core current coil.
For controlling and monitoring large industrial loads. Up to 3 phases can be monitored with this IB.
Solution Packs
PLAN-IAQ : Indoor air quality measurement
Simple plug-in-and-go indoor air quality measurement of PM1.0, PM2.5, PM10, CO2 (ppb), VOC (ppb), temperature and relative humidity. Includes the ability to send data to the cloud or store locally (on a headless server) along with a visualization dashboard and configurable alerts.
PLAN-OCC: Occupancy detection and people counting
A unique millimeter wave and thermal sensing based occupancy detection and people counting wall mount module.
Can accurately detect and count people in a large area without the need for any intrusive cameras. Simple plug-in-and-go setup along with a local or cloud based visualization dashboard.
PLAN-IPM1: In line 15A load controller and energy monitor
In-line load control and energy monitoring with a local or cloud based storage and visualization dashboard.
PLAN-NM7: Outdoor lighting controller with a C136.41 base
For use with outdoor street lighting with a NEMA twist lock base. Includes 3.3KVA load control, 0-10V dimming and energy monitoring
PLAN-SH1 : Sensor hub and sensors for controlled environmental agriculture applications
An IP68 sensor hub with sensors for soil moisture, soil pH, soil temperature, CO2 , air temperature , air relative humidity and Ethylene. Includes local or cloud based database storage, configurable alerts and an optional data visualization dashboard.